… for the Max from your sailing!

Maxi 34

The Maxi 34 was a centre cockpit version of the Maxi 1000 produced from 1992 to 1998
 

Peter Stonestreet suggested that I write up my experience of removing the keel from my 1997 Maxi 34 a year or two ago as, after the tragedy of Cheeky Raffiki, this is a topical subject.   The story starts with us purchasing Ariam from Roger Moon at SD Marine in 2012.   She had been chartered for most of her life and we paid an appropriate price, although being a Maxi she was fundamentally sound.   After a season I noticed that the bilges were never completely dry and began looking for what must be a small, but persistent leak.   On a reach to starboard, the discovery of a thin, pulsing trickle of seawater appearing from a crack in a section of fibreglass fillet at the aft end of the keel, indicated the potential source.

Deep gloom descended as my first reaction was that Ariam must have been grounded hard at some stage in her life, but Neil Desty (of Destys at Hamble Point) kindly came up to Kemps Quay to inspect the hull internally. His view was that this had not the case and the structure was in perfect condition.    He was reluctant to remove the keel as “you really, really don’t want to take the keel off a Maxi” but we agreed that the only way to pin down the leak was to drop the keel.   Thus Ariam was de-rigged and lifted out at Hamble Point.   With all 8 keel bolt nuts undone, you might have expected the keel to come away with little resistance, but not so.   After hours in the slings and much heaving and hammering from above, Desty’s troops suggested it would be better for the owner not to watch the next stage of the process.  This involved cutting scallops of material out of the fibreglass, front and rear and either side of the keel, and inserting crowbars to lever the keel out of its socket.   With an almighty ‘bang’ the keel eventually disconnected and sat upright in the dunnage prepared for it.

A thin, black line along the sealant indicated where water was entering through a crack at the forward end of the keel, seeping along its length and emerging through a keel bolt hole at the rear, then out through the fillet. I took the opportunity to have some corrosion pits in the keel filled, after slurry blasting the cast iron.   Destys then re-coppercoated it, cleaned out the keel slot and refitted the keel with new sealant.   Ariam has been bone dry ever since.

The point I took home from this was that the keel attachments in the Maxi 1000/ Maxi 34 hull are immensely well engineered. First of all the keel fits into a 2″ deep slot in the hull, ensuring there is plenty of solid fibreglass structure around it.  Secondly the bending moment the keel imposes on the hull, as the boat heels, is reacted over a wide area due to the flat, flared-out top section of the keel.  This makes the keel more expensive to cast, but has the added benefit of allowing the 8 keel bolts to be staggered athwartships, further spreading the load.   I am very happy to see how well the boat is constructed and have no worries about the keel detaching at sea.

maxi pbo 589firsttwopagesPractical Boat Owner Volume 589 (Summer 2015) contains a comprehensive review written by Peter K Poland of all Pelle Petterson’s Maxi boats, starting with the original Maxi 77 through to the Maxi 1300 and Maxi 1200.  We are extremely grateful to the Editor of PBO and to Peter Poland for granting us permission to reproduce this as a PDF.

To view it, please click here.

We have been contacted by Hans Sommerand, a Danish Maxi owner who is producing a website for the Maxi 34.

 

The website (in Danish) can be found here:- www.maxi34.qsite.dk. Contact details are on the website should any of our Maxi 34 owners wish to add their boat to the database.

We have been contacted by Hans Sommerand, a Danish Maxi owner who is producing a website for the Maxi 34.

 

The website (in Danish) can be found here:- www.maxi34.qsite.dk.

 

Contact details are on the website should any of our Maxi 34 owners wish to add their boat to the database.